KKSB Raspberry Pi 4 High Performance Cooler with PWM Fan Online Hot Sale


SKU: US-7780445061369 Category: Tag:


KKSB Raspberry Pi 4 High Performance Cooler with PWM Fan

Data Sheet for KKSB 30mm PWM Fan

KKSB PWM Fan Guide for Wiring and Temperature Configuration

Assembly Instruction

This is a compact high-performance cooler designed for Raspberry Pi 4. It comes with a 30mm PWM fan. The fins of the cooler are made of aluminium. The smaller form factor with just 43mm height makes the cooler compatible with the KKSB Raspberry Pi 4 Tall Case (sold separately).

What Makes KKSB Raspberry Pi 4 High-Performance Cooler Different from Oher Raspberry Pi Coolers in the Market?

The KKSB Raspberry Pi 4 High-Performance Cooler apparently looks similar to other Raspberry Pi coolers in the market. However, it has the following distinct features that make the KKSB Cooler more effective than most of the coolers available in the market:

Flat Aluminium Base for Perfect Contact with the CPU

The flat aluminium base makes perfect contact with the CPU. Most Raspberry Pi coolers in the market have pressed heat pipes without CNC-machine treatment. This is why their contact area remains uneven. The heat pipe of the KKSB Cooler is pressed along the block such that the interface along the CPU remains flat.

Quiet at All Modes

The KKSB PWM Fan on this high-performance cooler produces minimum sound even at maximum mode. In addition, it only operates when the temperature is above the configured limit so it stays off during the normal workload.

Nickel Plating

The KKSB High-Performance Cooler Unit is nickel plated.

Soldering between Thermal Pipe and Heatsink

Most Raspberry Pi coolers in the market have no soldering between the thermal pipes and heatsinks. The soldering between the heatsink and pipe of this KKSB Cooler optimises heat transfer through better contact.

Compact Size

The height of the KKSB High-Performance Cooler is just 43mm (4.3cm). This means that you can also use this cooler inside the KKSB Raspberry Pi 4 Tall Case. The height of the cooler is lower than other Raspberry Pi cooling towers in the market.

Intelligent Fan – Configurable Start / Stop Temperature Limits

The 30mm 5V PWM fan included in the box responds to the CPU temperature. It starts automatically when the CPU is too hot and stops when the CPU temperature drops to a certain degree.

You can configure the start and stop temperature limits from Raspberry Pi OS settings. This feature increases the life of the fan since it only runs when needed. With its Sealed Sleeve Bearing (SSB) system, the KKSB PWM Fan has a life expectancy of 30,000 hours.

Specifications of KKSB 30mm PWM Fan 

  • Impeller: 7 Blades – BLACK PBT (UL94V-0)
  • Frame Material: Reinforced Glass Fiber – BLACK PBT (UL94V-0)
  • Bearing System: Sealed Sleeve Bearing (SSB)
  • Rated Voltage: 5V DC
  • Operating Voltage: 4.5V ~ 5.5V DC
  • Start-Up Voltage: 3.5V DC
  • Rated Current: 0.04 Amp (Max: 0.06 Amp) | Testing Conditions: 25oC / 65% Relative Humidity
  • Labeled Current: 0.06 Amp
  • Rated Power: 0.20 Watt (Max: 0.30 Watt) | Testing Conditions: 25oC / 65% Relative Humidity
  • Rated Speed: 5000 ± 900 Rotation Per Minute (RPM) | Testing Conditions: 25oC / 65% Relative Humidity
  • Air Flow (Cubic Feet per Minute): 1.58 CFM (Min: 1.30 CFM)
  • Air Pressure: 0.98 mmAq (Min: 0.66 mmAq)
  • Control Interface: PWM
  • Coloured Wires: Red (+), Blue (PWM), and Black (-) (UL1061/28AWGx 100mm)
  • Compliance: RoHS
  • Safety Approval: CE, UL, CUL, TUV
  • Life Expectancy: Up to 30,000 Hours
  • Weight (PWM Fan): 4.9 Grams
  • Wires Length (Exposed out of the fan): Approximately 100mm (+/- 5mm)
  • Dimensions: 30mm x 30mm x 7mm | 3cm x 3cm x 0.7cm

Form Factor


Assembly Instructions

  • Use Clips with the cooling tower to attach the KKSB PWM Fan
  • Align the brackets of the tower with the Raspberry Pi 4 screw holes such that the PWM fan is facing opposite the Raspberry Pi 4 GPIO.
  • Secure the tower using screws

KKSB PWM Fan Connection Example with Raspberry Pi 4 GPIO

The KKSB 30mm 5V PWM Fan has 3x wires. Please connect each wire carefully to the right GPIO pin as shown below.

  • Red Wire (5V) corresponds to the GPIO Pin 4
  • Black Wire (Ground) corresponds to the GPIO Pin 6
  • Blue Wire (GPIO 14 TXD) corresponds to the GPIO Pin 8

How to Configure PWM Fan Start / Stop Temperature on Raspberry Pi OS?

Once the KKSB PWM fan is properly connected to the Raspberry Pi 4 GPIO, you can configure its auto start / stop temperature on Raspberry Pi OS in minutes.

  • On Raspberry Pi OS GUI, select the Raspberry Button
  • From the drop-down, locate and select Preferences
  • Select Raspberry Pi Configuration from the next drop-down
  • From the top bar, select Performance
  • Select Enable button
  • Fan GPIO should be 14 (Note, it is the Pin 8 connected to the PWM lead and defined as GPIO 14 TDX)
  • Select the temperature (Any value between 60oC and 120oC)
  • Restart the system to apply settings.

Items Included

  • KKSB Cooling Tower
  • Brackets and fasteners 
  • KKSB 30mm PWM Fan

Compatible Products (Sold Separately)

  • KKSB Raspberry Pi 4 Case (Tall)
Shipping & Delivery

We accept returns on non-sale items that are in original packaging, unused, and unwashed within 30 days of receipt. Please follow our returns/exchanges process below. If items do not meet our requirements for return, they will be shipped back to you in lieu of a refund. Shipping and handling charges are non-refundable (exceptions may apply).

Returns & Exchanges Process: If item(s) fit within our returns guidelines found in the Returns. Please allow 7-10 business days for the credit to appear on your account after your return is processed.